Now we are Percolating...



Barrel Band and Stock screw and we are COMPLETE!!!



The Outryder has a 25 1/2” barrel. This is great for this medium format Rifle. A “Carry all day” size.



I’ll keep testing and get it onto the range.

It’s gonna look sharp with its Barnes Badge, brass machined Barrel Band, and Brass Stock Inserts wherever machine screws are used.

This is a fine rifle. $4,500us. I have 23 years of Targets on the net. And these are coming. First buyer.

BTW ... It costs ME quite a bit to design and build as I do. This rifle is designed do that it can be completely disassembled ten times over the next one hundred years, and have absolutely NO degraded parts, screws, threads, etc. Meaning it’s not glued together, pressed, bent, riveted or otherwise made so a competent service technician would have to grind, pry, use solvent, etc. to do normal or even significant work. The main hub of the gun, consisting of firing valve body, upper receiver, rear hammer tube, and trigger housing; is “jig welded” as a permanent unit. However; any conceivable operation to any of those components is accessible. This is a well engineered PCP

Thank You Sincerely,
Gary



Edited 2 time(s). Last edit at 02/11/2019 12:30AM by barnespneumatic.

A nice sight when closing Sunday Night ...



Blessings
Gary

Fine looking Barnes specimen ! Can't hardly wait to see the grouping and the testing of the variety of 50 cal slugs you have.
That appears to be a very reasonable price for a air rifle of this quality and caliber !

Great job, Bob

Thank you Bob,

It is. My goal is that someone feel just as you have described. I did feel it honestly deserved more if a bump for the Walnut Color, the Pebbling, The Engraved Bolt, and I haven’t made final call on the Badge work. But I decided I’d rather that it spoke for itself as being a bit under priced.

Best,
Gary

Glad your back at it Gary.
Shouldn't last long.

A few shots gathered on this thread as well. Range time shortly. Must cast slugs. I’ve made a more complete set of Sizing dies to use during testing.